Does anybody know where I can find this??????
#1
Senior Member
Thread Starter
Join Date: Aug 1999
Location: CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody know where I can find this??????
For the longest time I have been looking for a Firehawk or GTA spoiler for my Firebird. Like this blue Firehawk: http://www.members.home.net/maplehawk/1992.htm
Does anyone know where I can find such a spoiler w/ out paying through the a$$ for it? Thanx
- Mike Harvey -
Does anyone know where I can find such a spoiler w/ out paying through the a$$ for it? Thanx
- Mike Harvey -
#2
Senior Member
Join Date: Jul 1999
Location: Shelby Twp., Mi., USA
Posts: 851
Likes: 0
Received 1 Like
on
1 Post
Car: '84 Fiero ('01 GA interior)
Engine: '96 4.0 Aurora
Transmission: '96 4T80E
I don't know what you consider a lot of money, but Thirdgen Resource (new sponser) has them for $440. I believe they are fiberglass, so they are lighter and won't crack.
#3
Senior Member
Thread Starter
Join Date: Aug 1999
Location: CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I'm not saying that price was cheap but it definetely sounds like a nice mod to do but I still got to paint it as well. Hopefully I can run across one at a junk yard but I have not seen one at a junk yard for a year now but they didn't want to part that GTA out and it is still sitting there and there are still so stubborn not to part it out. Oh well, morons you can call them. Thanx
- Mike Harvey -
- Mike Harvey -
#5
Supreme Member
iTrader: (2)
Join Date: Nov 1999
Location: Monroe,NC
Posts: 1,779
Likes: 0
Received 20 Likes
on
15 Posts
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
And the same year Formulas as well.
------------------
Mongoose-NCTGA-1990 Pontiac Formula/305 TBI-700R4 with Edelbrock Performer TBI intake,TES headers,and STB,K&N,MSD-6AL,Holley laser shot coil,Accel Extreme 9000 wires,Jet Stage 2 chip,TCI shift kit with corvette servo,Richmond 3.73 gear with Auburn 3 series posi,no cat,SLP 3" cat back,Eibach sportline springs,Energy Suspension poly throughout,Lakewood LCA and adjustable panhard bar package,SSM subframe connectors,IROC wonder bar,Tokico 5 way adjustable struts and shocks,Autometer electric fuel pressure gauge,Alpine,JL Audio,MB Quart,92 GTA taillights,92 GTA aero wing and hatch,Steve Spohn LCA relocater kit,MacEwen White face gauges,84 T/A cold air induction air cleaner.
------------------
Mongoose-NCTGA-1990 Pontiac Formula/305 TBI-700R4 with Edelbrock Performer TBI intake,TES headers,and STB,K&N,MSD-6AL,Holley laser shot coil,Accel Extreme 9000 wires,Jet Stage 2 chip,TCI shift kit with corvette servo,Richmond 3.73 gear with Auburn 3 series posi,no cat,SLP 3" cat back,Eibach sportline springs,Energy Suspension poly throughout,Lakewood LCA and adjustable panhard bar package,SSM subframe connectors,IROC wonder bar,Tokico 5 way adjustable struts and shocks,Autometer electric fuel pressure gauge,Alpine,JL Audio,MB Quart,92 GTA taillights,92 GTA aero wing and hatch,Steve Spohn LCA relocater kit,MacEwen White face gauges,84 T/A cold air induction air cleaner.
#6
Not to brag but I have one Glass and all sitting in my Garage. It was a hard piece to find. Remember it is not a direct bolt on to the wing you have now it lays a little different so you might need to get some of the hatch area repainted.
------------------
86 Trans Am 355 TPI Rebuilt 700R4 with Corvette servo, modified valve body, and a B&M Torque Converter (2000 rpm stall w/ lock up), 87 350 block bored .30 with new crank, bearings, rings, and magnafluxed rods. Reworked 305 heads with 3-angle valve job. Added in the rebuild was an SLP TPI cam, BBK 58mm Throttle Body,SVO 24# injectors,MSD 6A, Hypertech Power Coil, 1.5 Crane roller tipped rocker arms, SLP Intake Runners and Port matching in upper intake including fully ported plenum, TPIS adjustable fuel pressure regulator @ 46psi, Hooker shorty style headers w/ Thermotech heat wrapping, Custom 3” exhaust with Flowmaster muffler and chrome quad tips, Hypertech Thermomaster Computer chip, K&N open element cone filter on modified MAF per TPIS specs, MSD Wires, removal of A/C hardware and a 1LE firewall cover installed. Also there has been a PST front suspension kit with Hotchkis strut tower brace
http://geocities.com/SunsetStrip/Garage/9548/kyle.html
Kills:
95 Talon TSI, 96 Probe GT, 91 T/A L98, 89 RS, 86 Mustang GT, 88 Mustang LX 5.0, 92 Thunderbird V8. couple or ricers that I think were Civics or Preludes not sure what year, 95 Celica GT-S, 94 Chevy 1/4 ton 350, one of those NASCAR F150's
------------------
86 Trans Am 355 TPI Rebuilt 700R4 with Corvette servo, modified valve body, and a B&M Torque Converter (2000 rpm stall w/ lock up), 87 350 block bored .30 with new crank, bearings, rings, and magnafluxed rods. Reworked 305 heads with 3-angle valve job. Added in the rebuild was an SLP TPI cam, BBK 58mm Throttle Body,SVO 24# injectors,MSD 6A, Hypertech Power Coil, 1.5 Crane roller tipped rocker arms, SLP Intake Runners and Port matching in upper intake including fully ported plenum, TPIS adjustable fuel pressure regulator @ 46psi, Hooker shorty style headers w/ Thermotech heat wrapping, Custom 3” exhaust with Flowmaster muffler and chrome quad tips, Hypertech Thermomaster Computer chip, K&N open element cone filter on modified MAF per TPIS specs, MSD Wires, removal of A/C hardware and a 1LE firewall cover installed. Also there has been a PST front suspension kit with Hotchkis strut tower brace
http://geocities.com/SunsetStrip/Garage/9548/kyle.html
Kills:
95 Talon TSI, 96 Probe GT, 91 T/A L98, 89 RS, 86 Mustang GT, 88 Mustang LX 5.0, 92 Thunderbird V8. couple or ricers that I think were Civics or Preludes not sure what year, 95 Celica GT-S, 94 Chevy 1/4 ton 350, one of those NASCAR F150's
#7
Member
Join Date: Oct 2000
Location: N. Wilkesboro, NC
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
try this link http://erebunicorp.com/wings/pontiacFBIRD.htm
Thread
Thread Starter
Forum
Replies
Last Post
MikkoV
TPI
2
09-09-2015 04:25 PM
Street Lethal
Miscellaneous Third Gen Items!
0
09-07-2015 01:09 PM