Has anyone else had a problem with power windows going down too far? Both the driver and passenger side on mine go so far down that they get stuck up under the rubber channel on the outside of the window that seals it when the window is up. Of course, simpley not letting the window down the extra half inch solves the problem, but I was wondering if there is any way to adjust this so that I don't have to mother it every time I put the window down.

One other thing--when I got the car painted, the shop tore off the plastic water barrier behind the door panel and didn't replace it. Would I be better checking for this at the dealer or simply fabricating one myself?

[This message has been edited by deacon17 (edited November 25, 2000).]

 

Here's the <a href="https://www.thirdgen.org/newdesign/tech/windowadjust.shtml">tech article</a> that will tell you how to do it. Good luck!

[This message has been edited by 86ZRICHIE (edited November 25, 2000).]