I have the three piece spoiler on the back of my 92 and am switching to the one piece Z28 spoiler. How are the end pieces connected to the car? Are they bolted on from the inside or are they put on with adhesive? Any help would be appreciated

------------------
White 92 RS,388 cu.in.N/A
3.73 gears,auburn posi
Best 60 ft : 1.97
Best 1/4 : 12.679
all runs made on BFG Radials (NOT DRAG)
Complete Steve Spohn Rear Suspension
Full Custom Dash full of Autometer guages
Extremely Loud Stereo !
Driven Daily

 

I'm pretty shure that it is bolts

Not for shure though..

 

after replacing mine earlier last year when a girl rear ended me... bolted

------------------
Hey feel free to chat with me on AOL IM if you wanna.. Darkhal2000!
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm

 

Their bolted on and if I remember right, you need to remove the taillight assemblies to access them.

------------------
87 IROC 350 TPI with less than 10k original miles
www.users.uswest.net/~smoyer/iroc.htm

 

absolutely scott... remove assembly... I almost want to say removing all molding from the trunk too.. no wait.. I'm a dumb A** you need to remove the molding to get at the tails! *cracks himself in the head*

------------------
Hey feel free to chat with me on AOL IM if you wanna.. Darkhal2000!
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm

 

2 bolts on the inside that go into the side part of the side pieces.Just take off your interior panels for this.And one bolt that goes up into the bottom part of the side pieces.To get access to the third bolt,you will need to remove the taillight assembly and remove the plastic cap that covers the access hole to the bolt.

------------------
'91 RS 5.0 TBI
New paint-solid black
ROH Snyper wheels-17x9 wrapped in 275/40/17
Eibach sportline springs
ASCD SS hood
Flowmaster cat-back
TBI mods
383 implantation soon to come.

 

Thank you all for your inputs