How do you remove the doors on a 92 Z28?
Thread Starter
Junior Member
Joined: Oct 2012
Posts: 51
Likes: 0
From: Camp Lejeune, NC
Car: 1992 Z28
Engine: 355
Transmission: 700R4
How do you remove the doors on a 92 Z28?
Everything I have read says to just unbolt the hinges. I can't figure out how I'm supposed to unbolt the lower hinge. Only one of three bolts on the lower hinge has a bolt on it and I can't figure out how to get to it with the pin that is in the way. Any help would be greatly appreciated.
Member
Joined: Aug 2008
Posts: 428
Likes: 5
From: Auburn, MI
Re: How do you remove the doors on a 92 Z28?
Two of the three bolts on the lower hinge come from the inside of the car. If you remove the kick panels you will see them. Sometimes there is a rubber/tar patch over the access hole.
Thread Starter
Junior Member
Joined: Oct 2012
Posts: 51
Likes: 0
From: Camp Lejeune, NC
Car: 1992 Z28
Engine: 355
Transmission: 700R4
Re: How do you remove the doors on a 92 Z28?
My wife looked at it and pretty much told me the same thing you did. Thank you, though. I felt kike a retard after she showed me. It was pretty obvious the bolts were facing the other direction.
Member
Joined: Mar 2012
Posts: 195
Likes: 0
From: Omaha, NE
Car: 1987 IROC-Z
Engine: Vortec 350 crate #12530282
Transmission: 700-r4 Auto
Axle/Gears: 3.23
Re: How do you remove the doors on a 92 Z28?
haha, don't feel so bad. same thing happened to me the first time i swapped doors. i sat there for a day kicking tires thinking "what the heck!?!?"
Senior Member
Joined: May 2011
Posts: 702
Likes: 0
From: Los Angeles, California
Car: 1992 Chevrolet Camaro Z28
Engine: 5.7 TPI
Transmission: 700R4 Overdrive Automatic
Axle/Gears: 3.23:1 Positraction
Re: How do you remove the doors on a 92 Z28?
We're Bright & Smart that we can figure things out its just that we are usually thinking other things and are preoccupied with other problems that we sometimes have the light bulb switch turned off. 
Thread
Thread Starter
Forum
Replies
Last Post