When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Didn't really need one. Very little needed repair and what did I did myself. Fixed head liner, dash pad and audio system. The rest is stock. There is a guy in kelowna that I know does good work tho
Not black (sorry) but these are my two thirdgens. The TA is done and I just bought the blue one 3 weeks ago and have been fixing it up. I have the graphics to put on and a bra and blackout headlight kit.
Mad Max WISHES he had a car like this! I like it for what it is :-)
Ya see we were drinkin and thinkin and thinkin and drinkin. I was using nail polish remover to get that stupid spray on tint off the lights and some remover dropped on the paint. Happy accident the red paint looks good under it. So after some nail polish remover, goof off, and so b12 and now we have this. So our drinkin and thinkin has led us to the thought of buffing out the top also.
Hey guys, I'm new here, but I figured I'd share my T/A even though it's not nearly as nice as many of yours!
She was originally a 305 automatic car, but the previous owner has swapped in an L31 350 and a T5. It was also originally burgundy, but he painted it black in his barn (and not very well)!
Anyway, she's pretty clapped out, but the body is rust free and that's hard to come by in Canada. I picked her up a few weeks ago for $2700!
My black beauty. It was a burnt out mess but she came around nicely. A berlinetta supplied the interior from a yard. I wished I had picks of the interior. That was quite a few years ago. I miss it bad. Never should have sold it.
My '89 Formula with a TBI 305 and a T-5. I installed a Torsen differential out of a 4th gen. Many other mods. I've had it since '08, and drive it daily.
Hey Black18Ice sweet ride!! How much work was it to get those rims to fit? Did you have to run spacers? Those are what I would like to run, so if you could share the manufacture and the size and the spacing that would be AWSOME (also were they internet purchase or store)
Hey Black18Ice sweet ride!! How much work was it to get those rims to fit? Did you have to run spacers? Those are what I would like to run, so if you could share the manufacture and the size and the spacing that would be AWSOME (also were they internet purchase or store)
They look like corvette rims, prob C5. You can get them at OE wheels online for cheap. I just got 18x9s corvette C6 Z06 with tires for like $1100 shipped. You need to run spacers for the 4th gen style to fit the 3rd gen. Most people run 2" spacers on all 4. I run 1.25" front but I have a BAER brake kit which pushes the rotor out more than stock. My rear is wider than stock so I only needed a 1/2" slip on spacer.
Hey Black18Ice sweet ride!! How much work was it to get those rims to fit? Did you have to run spacers? Those are what I would like to run, so if you could share the manufacture and the size and the spacing that would be AWSOME (also were they internet purchase or store)
Thanks. They are c5 z06 Motorsport wheels. I'm running 18x9.5 in the front and 18x10.5 in the rear. I got them used locally but oewheels has the 10.5s right now I think. Factory Reproductions might have some too. I got a replacement through them. They are hard to find with the fake rivets. I'm running a fourth gen rear with no spacers and up front I have 2" spacers. I have a big brake kit so that pushes the front out even more. Usually you can go down to a 1 3/4" spacer with the bbk.
