Hey guys,
Im writing to find out if anyone knows where do they sell aftermarket lenses for the side or front blinkers(white cystal see through) Im tired of the original yellow and it looks awful. I dont wanna cut a part of the fender just to install some lights out of another car, so if u know please post the site. thanks

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

WOW thanks for all replies. Guess there is no lenses that exist.

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

You mean something like these?

<IMG SRC ="http://albums.photopoint.com/j/View?u=1427158&a=10788180&p=39811498&Sequence=0&res=high">

If interested, click on the link in my signature and go to "Custom Front Parking Lamps" for info on how I made them.

------------------
Willie

Supercharged 1987 305 IROC-Z, Daily-Driver, Emissions-Legal.
Paxton (6-psig): 12.57 @ 111 mph.
Paxton (6-psig) & 50-hp nitrous: 12.04 @ 114 mph.
ATI D1SC (10-psig): ?

http://willie.camaro-firebird.org/

1987 "20th Anniversary Commemorative Edition" Z28 Convertible -- Super Chevy Show Class Winner, 1998.

[This message has been edited by Willie (edited March 16, 2001).]

 

hey I saw some guy with a black Iroc and he used that spary can black out kit. And it looked pretty mean. So you might want to check that out. hope this helps

 

I would spray paint it but my insurance company has told me for instance if get into an accident with another automobile they can use that against me saying how the light was covered bla bla bla. To the other one im really not interested in that type of clear. Im talking about the ones that imports put on their existing lights u know the white ones

 

I'd just like to be able to "clean" my front parking lamp lenses but it seems they are a one piece unit and you can't get in there to clean them good. Anybody had any success doing cleaning them?

[QUOTE]Originally posted by vortech305:
[B]Hey guys,
Im writing to find out if anyone knows where do they sell aftermarket lenses

------------------
'91 Camaro RS

 

I don't know if this will work, but find some like plexiglass and make your own.. just go to the store pick up the color, saw it to the right size and put them in.. It'll look different cuz there is no reflector, but atleast it's your own choice



------------------
92 Rs Heritage Edition Camaro
305
3.27 posi Rear end
Flow masters
not to much else to make it more than stock until I put that 350 in shortly

IM: DarkHal 2000
Feel free to join my Webring listed on my web page (X-treme Fbody). I'm always looking for third gen's to add.
My site, http://www.personal.psu.edu/users/j/m/jmj211/index.htm

 

true good point