Body General body information and techniques for restoration, repairs, and modifications.

New billet dash panel with Phantom gauges,check it out!

Thread Tools
 
Search this Thread
 
Old Aug 24, 2001 | 02:58 AM
  #1  
PROCHARGED89Z's Avatar
Thread Starter
Member
 
Joined: Nov 1999
Posts: 391
Likes: 0
From: FALL RIVER MA USA
New billet dash panel with Phantom gauges,check it out!

Click the link in my sig,this is my homepage,its recently been updated,also check the Whats new Page for another interior shot.Picture is kind of crappy of the panel,I will get better pics when I get it installed.

------------------
Check out my Hompage,or the beginnings of one.355 dynoed at 400HP at 5800RPM & 410LBFT of TQ,on Motorhttp://www.procharged89z.cz28.com/index.html
Reply
Old Aug 24, 2001 | 10:41 AM
  #2  
cvpde37's Avatar
Senior Member
 
Joined: Oct 1999
Posts: 505
Likes: 0
From: Silvis, Il, USA
The billet gauge panel looks good. It's pretty much what I have been planning on doing this winter just not the white face gauges. If you could post the number where you got the panel I would appreciate it. Also did the fuel gauge hook into you existing wiring? What size gauges? Thanks.

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page
Reply
Old Aug 24, 2001 | 02:42 PM
  #3  
PROCHARGED89Z's Avatar
Thread Starter
Member
 
Joined: Nov 1999
Posts: 391
Likes: 0
From: FALL RIVER MA USA
The name of the buisness is SS Billet Customs they are in Las Vegas,phone # is 1 702 646 3554 ask for Steve.Fuel gauge hooked into exhisting wiring as did the blinker lights and high beam indicator wiring,he supplies 2 green lights and a red high beam indicator light ,hard to see in the pic.You just have to know which wires are which in the harness behind the stock gauges.The speedometer i have is electronic,so I got a sender from Speedometer sevice company phine mumber is 414 463 6660.The sender hooks up to the side of the tranny and you remove the speedo cable.

------------------
Check out my Hompage,or the beginnings of one.355 dynoed at 400HP at 5800RPM & 410LBFT of TQ,on Motorhttp://www.procharged89z.cz28.com/index.html

[This message has been edited by PROCHARGED89Z (edited August 24, 2001).]
Reply
Old Aug 26, 2001 | 06:57 PM
  #4  
cvpde37's Avatar
Senior Member
 
Joined: Oct 1999
Posts: 505
Likes: 0
From: Silvis, Il, USA
Procharged, thanks for the info. I'll be giving them a call so I can make this a small project for over the winter. Took a look at your car while I was at your page. Nice!! Right now I have nothing on the interior that is billet so I'm going to have to do a little painting to make it match and will probably be going with black face gauges. Until you posted this I was wondering who I was going to get to make me this thing.

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page
Reply
Old Aug 27, 2001 | 09:31 PM
  #5  
cvpde37's Avatar
Senior Member
 
Joined: Oct 1999
Posts: 505
Likes: 0
From: Silvis, Il, USA
One more question if you don't mind.....How much?

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page
Reply
Old Aug 28, 2001 | 10:25 AM
  #6  
Sals82Z28's Avatar
Member
 
Joined: Dec 2000
Posts: 142
Likes: 0
From: Bellingham Ma
ProCharge,
First let me say you ride is awesome, hard work is definately paying off. Second on your web page you have a pic of Preston Smith's turbocharged 305, that wouldn't happen to be Smitty's car is it? I don't know the guy too well but I've seen his car run at New England and it's a nice car.
Reply
Old Aug 28, 2001 | 11:11 AM
  #7  
PROCHARGED89Z's Avatar
Thread Starter
Member
 
Joined: Nov 1999
Posts: 391
Likes: 0
From: FALL RIVER MA USA
CVpde37,Im very sorry for the slow response,I was working all weekend.I did send you a detailed email,but now found out you didnt get it.It cost me $145 +shipping.It is kind of pricey,but It really looks good and brings out the interior.Ill try sending that email again.Anything else let me know.

Sal82Z28,Thank you very much for the comments.Yes ,you are right that is Prestons motor.I have seen his car run with the Vortech,but no with this new setup.Do you bring your car to the track?Let me know Ill be going up this next month,just waiting for my friend to get his tow hitch for the trailer.Thanks again,and please if you dont mind both of you please sign my guestbook



------------------
Check out my Hompage,or the beginnings of one.355 dynoed at 400HP at 5800RPM & 410LBFT of TQ,on Motorhttp://www.procharged89z.cz28.com/index.html
Reply
Old Aug 28, 2001 | 12:04 PM
  #8  
Sals82Z28's Avatar
Member
 
Joined: Dec 2000
Posts: 142
Likes: 0
From: Bellingham Ma
Actually my car isn't running right now but I still go to the track. Tell me what day or night you'll be up there and I'll go.
Do you have the same exhaust set up as Smitty? What size pipes is he running?
Reply
Old Aug 28, 2001 | 08:55 PM
  #9  
West Coast GTA Man's Avatar
Senior Member
 
Joined: Jun 2001
Posts: 562
Likes: 0
From: New Port Richey, Florida, USA
Car: 1989 Pontiac GTA Hardtop.
Engine: ZZ4 - 350
Transmission: Garbage
Swwweeeeet!

------------------
Check out My Car Pics http://albums.photo.epson.com/j/Albu...667&a=13599419

Gran Turismo Americano "The Ultimate Firebird"
Smokin 1989 GTA- Bone stock except for exhaust. (no catalytic-stainless pipe into Flowmaster 2 chamber) & AC Delco Rapid Fire Plugs
Reply
Old Sep 21, 2002 | 12:39 PM
  #10  
redcamaro83's Avatar
Supreme Member
 
Joined: Sep 2000
Posts: 1,370
Likes: 0
From: Chicago, IL
Car: 86 Z28
Engine: 305
Transmission: 700r4
Axle/Gears: TBD
is the company still in biz
can you post pictures of the dash?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
Vintageracer
Camaros for Sale
12
Jan 10, 2020 05:33 PM
Street Lethal
Interior
7
Aug 14, 2015 08:25 PM
blacksunshine'91
Interior Parts Wanted
2
Aug 10, 2015 12:04 AM




All times are GMT -5. The time now is 05:29 AM.