Can anyone here tell me how to modify my seats to get more leg and headroom?
Subscribe
I need more leg room, it feels like I'm hugging the steering wheel... I'm 6'7.. is there anything I can do? How much would it cost to have the seat mounts moved back a little?
EDIT: I took the driver's seat out it looks like I could swap the seat track off and use one from another car, is this possible?
------------------
4 bolt 350, 10.4:1 Compression, Edelbrock Aluminum Heads 6085, LT4 Hot Cam /w 1.6 full rollers (Crane), Scat Crank, SLP 1 3/4" Headers, SLP Cold Air Intake, Crane AFPR, 48mm TB, ported plenum, stock runners, Accel Super Ram intake manifold, 95Z #24 injectors, stock fuel rails, T5 Tranny, 3.45s, 9 bolt rear, 4 wheel discs, BFG Comp T/As rear, SZ50s in front, Alston SFCs, ES Trans Mount, ES front A-arm bushings, ES front sway bar end links
[This message has been edited by Mike89GTA (edited October 04, 2001).]
EDIT: I took the driver's seat out it looks like I could swap the seat track off and use one from another car, is this possible?
------------------
4 bolt 350, 10.4:1 Compression, Edelbrock Aluminum Heads 6085, LT4 Hot Cam /w 1.6 full rollers (Crane), Scat Crank, SLP 1 3/4" Headers, SLP Cold Air Intake, Crane AFPR, 48mm TB, ported plenum, stock runners, Accel Super Ram intake manifold, 95Z #24 injectors, stock fuel rails, T5 Tranny, 3.45s, 9 bolt rear, 4 wheel discs, BFG Comp T/As rear, SZ50s in front, Alston SFCs, ES Trans Mount, ES front A-arm bushings, ES front sway bar end links
[This message has been edited by Mike89GTA (edited October 04, 2001).]
Member
someone I know had a camaro and he is also very tall he took the car to some shop and they made little metal extensions for where the seat bolts down and then bolted the seat to the extensions.
Hope that helps
Hope that helps