i have a few questions about the ground effects found on 85-92 camaros.

1) in 91 did they change the rear quarter ground effects and the rear bumper cover. if i had the 85-90 gfx, and i wanted to change to 91-92 gfx, would i have to replace those rear pieces too?

2) how would it look if i had 85-90 rocker/door gfx and a 91-92 front spoiler or 91-92 rocker/door gfx and a 85-90 front spoiler. would this look bad?

3) if i have rocker gfx that have the z28 emblem, will the camaro emblem fit the same?

i'm changing my 87 camaro lt over to ground effects. i have 88 iroc bumper and front end, and 86 z28 rear quarter, rocker, and door gfx. i found a really good deal on a 91-92 front spoiler.

------------------

 

I dont think they changed the rear bumper and the rear quarter gfx.The front end wouldnt look bad with the 91 spoiler on it,and the 85 on the door.I personally would keep it with the 85 front spoiler and door gfx.Thats what I'm doing to my 85SC you need to make a bracket for the rocker panel gfx so they stick out right.Monday I will fabricate mine.Also the camaro emblem for the rocker panel gfx has been discontinued,but you can make your own.The way I did mine is take the Z28s emblem and seperate the black plastic from the emblem.Now you get the camaro emblem from the rear bumper,cut the bowtie emblem off and trim the camaro emblem until it fits in the plastic piece that you took off of the Z28s.It should fit in there just like new and look just as good.Hope i've been able to help.

 

Im 99% sure the rear quarter gfx pieces must have changed in 91, since I know the rear bumper did.


Ken

------------------
1986 IROC-Z Conv't
- White Gauges, 17x9.5 TT II rims w/275/40x17" F1s, 1.5" Jamex Lowering Springs, BMR stb, Lakewood APR, PST suspension parts, Edelbrock Trailing Arms, KYBs, Edelbrock RPM Cat-Back, Edelbrock JHC Headers, Catco, World Products Heads, CompCam, SLP runners, Ported Plenum, K&N, Airfoil +polished/billet dress-up stuff
ChevyKen's Cars

Administrator @ ChevyWorld.net