Triple Gauge's under a/c vents
Thread Starter
Junior Member
Joined: Sep 2001
Posts: 58
Likes: 0
From: Decatur, ILL,
Triple Gauge's under a/c vents
I was thinking about mounting a set of triple gauges under my a/c vents and was wondering if anybody out there has? If so how big of a pain in the a$$ was it, where did you run your wire's etc. If any body has any pictures that would be great.
Senior Member
Joined: Jul 2001
Posts: 602
Likes: 0
From: St.Charles, MO/ Edwardsville, IL
Car: '03 S-10/ '87 Trans Am
Engine: mild 350
Transmission: TH350
I have a triple guage pod under my a/c vents. It was easy to install. I just marked two holes where I wanted them, drilled them, then screwed the pod up there.
I have mine slanted torwards the drivers side and red light bulbs in them. I'll take some pics and try to post em.
My wires are hanging there running above the a/c controls for now. My car still looks bad and I don't car about appeance until I get my paintjob next month, maybe then I'll start straighting her up.
-Matt
------------------
1984 Camaro Z28 - Black w/ Grey int.
-GM Goodwrench 350 with Edelbrock 600 Carb, Edelbrock Preformer RPM intake, AC Delco plugs, 8mm AC Delco wires, 14" Accel filter, Homemade Cold Air Indctn., Edelbrock Chrome valve covers, breather, and Air cleaner.
- Profesionally Built Turbo-350 with 2500 RPM Stall converter, Hurst shifter, & one wicked shift kit.
- Eagle Alloys 15" Alum. Rims surrounded by P235/60R15 BF Goodrich Radial T/A's
-Comming Soon:
3.73's, MAC Cat-Back, hollowed cat., B&M Megashifter, & Paint: Navy Blue Metallic w/ Silver strips
Pics at: http://members.fbody.com/flashz28/
I have mine slanted torwards the drivers side and red light bulbs in them. I'll take some pics and try to post em.
My wires are hanging there running above the a/c controls for now. My car still looks bad and I don't car about appeance until I get my paintjob next month, maybe then I'll start straighting her up.
-Matt
------------------
1984 Camaro Z28 - Black w/ Grey int.
-GM Goodwrench 350 with Edelbrock 600 Carb, Edelbrock Preformer RPM intake, AC Delco plugs, 8mm AC Delco wires, 14" Accel filter, Homemade Cold Air Indctn., Edelbrock Chrome valve covers, breather, and Air cleaner.
- Profesionally Built Turbo-350 with 2500 RPM Stall converter, Hurst shifter, & one wicked shift kit.
- Eagle Alloys 15" Alum. Rims surrounded by P235/60R15 BF Goodrich Radial T/A's
-Comming Soon:
3.73's, MAC Cat-Back, hollowed cat., B&M Megashifter, & Paint: Navy Blue Metallic w/ Silver strips
Pics at: http://members.fbody.com/flashz28/
Thread Starter
Junior Member
Joined: Sep 2001
Posts: 58
Likes: 0
From: Decatur, ILL,
<font face="Verdana, Arial" size="2">Originally posted by iroc u too:
I was thinking about mounting a set of triple gauges under my a/c vents and was wondering if anybody out there has? If so how big of a pain in the a$$ was it, where did you run your wire's etc. If any body has any pictures that would be great. Thanks for the response, i'll be looking for the pics do you have any idea's where the wire could run?( AND BE HIDDEN )</font>
I was thinking about mounting a set of triple gauges under my a/c vents and was wondering if anybody out there has? If so how big of a pain in the a$$ was it, where did you run your wire's etc. If any body has any pictures that would be great. Thanks for the response, i'll be looking for the pics do you have any idea's where the wire could run?( AND BE HIDDEN )</font>
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
Nov 10, 2015 04:07 PM
