Adjusting Door for Flush Fit
04-05-2017, 06:12 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Adjusting Door for Flush Fit
On the rear of the door where it meets the quarter the bottom of the door is flush and the top is in about 1/8". It appears the door should be rotated a bit but can't since the hinge to door is not adjustable only the hinge to pillar. Can the top hinge be shimmed out slightly to rotate the door to get a flush fit to the quarter?
