Sticking Drivers side Door
Joined: Feb 2017
Posts: 4,174
Likes: 569
From: Meriden, CT 06451
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: Sticking Drivers side Door
Your door is sagging because the hinge pin bushings are worn. The hinges are welded to the door and not adjustable. Open the door and grab the outer end and wiggle it up and down. If you can feel any slop, then you need to replace the bushings.
You could adjust the door striker bolt down a little lower, but this is only a band-aid and the door would most likely then rub on the sill plate.
You could adjust the door striker bolt down a little lower, but this is only a band-aid and the door would most likely then rub on the sill plate.
Thread
Thread Starter
Forum
Replies
Last Post
shagdonk
Interior Parts Wanted
2
Sep 22, 2016 04:33 PM
retro-roco
Firebirds for Sale
0
Sep 11, 2016 01:46 PM








