Not sure if this is the right place. If not, my apologies, please move it.

I've had some bad luck, got injured in an incident with a tow truck. Long story short, they just found sheetmetal holes to hook, and it tore free under load sending the car flying.

I'm hoping some of you guys may have good pics (maybe from on a lift) of what the underneath would/should have looked like that we can put in front of the operator and have him need to identify the proper attachment points.

the car we're trying to match is a 1985 firebird v8 at.

 

Here are a couple I had saved a while ago sorry first pic is probably better but too small - hope this helps you