been piecing this together for years finally doing front brake upgrade !!!

 

looks pretty
so what you got going on there?

 

Hmmm, strange. Looks like you have retained the original 10.5" rotor? If so I can't see much purpose in this swap. Care you share what you goal is?

 

That looks like a 1le rotor and 1le or c4 caliper

 

I didn't know the 1LE had cross drilled rotors

 

Oh DUH. I forget the 1LE also had the built in hub. For some reason I was thinking they were a slip on rotor. That makes a lot more sense. Sorry to the OP.

 

It didn't stock. These are aftermarket replacements.

 

Thanks for the interest in my new brake system .. This is a Baer brake track pac C4 caliper with SSBC 1le adapter brackets and 1le abutments all powder coated. The rotors are made by ERP out of Canada I also am installing braided steel flex hoses .
this is to go with my 1le Pbr brakes that I all ready have out back.. I have been piecing this system together for years first got the calipers in 2007 !! About time I replace the 20 year old original 10.5 front brake system with something shall I say more substantial

if you are observant you will notice the I have the rotor on the wrong side of the car..... don't worry this is only the mock up test fitting of components ..