Wheel Cylinder HELP!!!ASAP!
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Wheel Cylinder HELP!!!ASAP!
Restallation? Use a hammer and a big punch.
Ed
Ed
Joined: Aug 2006
Posts: 12,812
Likes: 110
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: Wheel Cylinder HELP!!!ASAP!
ed knows his brakes, so i would go with him on this.
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Wheel Cylinder HELP!!!ASAP!
Yep, that's all you need. I almost replied with this thread but it covers the removal:
https://www.thirdgen.org/forums/brak...drum-rear.html
Place it as close to where it needs to be, have someone hold one side of the tab on the clip firmly with a punch or large screwdriver while you place the punch on the opposite tab and hit it sharply with a hammer. Please wear gloves and eye protection.
Ed
https://www.thirdgen.org/forums/brak...drum-rear.html
Place it as close to where it needs to be, have someone hold one side of the tab on the clip firmly with a punch or large screwdriver while you place the punch on the opposite tab and hit it sharply with a hammer. Please wear gloves and eye protection.
Ed
Thread
Thread Starter
Forum
Replies
Last Post
morrow
Suspension and Chassis
78
Jan 13, 2024 12:29 PM