Third Gen in SE KS
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 13
Likes: 0
From: Pittsburg, Ks
THIRD GEN IN SE KS
I was looking to see if someone in the southeast KS area would be willing to trade a third Gen for a 92 Mustang with a 351W and T-5. More info here: http://www.mokandragway.com/phpBB2/v...ic.php?t=13749
Last edited by Justino_15; Sep 10, 2007 at 09:31 PM.
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 13
Likes: 0
From: Pittsburg, Ks
Re: Third Gen in SE KS
Wanting to find a camaro soon! Willing to travel reasonable distance. Will also consider throwing in my motorcycle and possibly even cash for the right car. I have $5000 invested, willing to take a loss to get a 3rd gen
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: Third Gen in SE KS
Hello,
I realize that I am not quite as close as you would like but I'm going to throw this out there anyway. I have a 1988 RS with less than 96,000 original miles. Everything on it works. It has A/C, power windows, power door locks, and power hatch release and pull down. It also has tilt wheel, cruise control and quick ratio steering. The car has a 2.8 MPFI with a 700R4. This could be of great interest to you because you are guaranteed that the chassis is not tweaked like a V8 car. Nothing is easier on the chassis than a low mileage 6 cyl. and auto...and it will get great gas mileage. Right now I'm getting 22 city and 31 highway miles. I have a set of AGX 8 way adjustable struts and shocks in the rear. I have a FlowMaster catback exhaust, K&N filters and a MSD 6A ignition. The car needs paint but is rust free. It currently has an IROC hood and ....the RS's came with the IROC ground effects. It currently is sanded and ready for primer and paint. It runs on GTA wheels ( the lightest factory 3rd gen wheels available) and Toyo Proxies. The interior is in very good condition, as you would imagine a low mileage car to be. The interior is black. It's got a nice Kenwood stereo. I am planning to go propane fuel and found an El Camino. That is the only reason I'm selling. The car has been very reliable and fun to drive. I have everything to convert to V8 including a set of Hotchkis front springs, V8 motor mounts, new Hedman full length headers, a four bolt main 350 block, aluminum driveshaft, Spohn crossmember for T5 or 700R4, Spohn T56 six speed crossmember (take your choice on one or the other), Pictures for the car are available if you are interested. Send me your e-mail address.
I realize that I am not quite as close as you would like but I'm going to throw this out there anyway. I have a 1988 RS with less than 96,000 original miles. Everything on it works. It has A/C, power windows, power door locks, and power hatch release and pull down. It also has tilt wheel, cruise control and quick ratio steering. The car has a 2.8 MPFI with a 700R4. This could be of great interest to you because you are guaranteed that the chassis is not tweaked like a V8 car. Nothing is easier on the chassis than a low mileage 6 cyl. and auto...and it will get great gas mileage. Right now I'm getting 22 city and 31 highway miles. I have a set of AGX 8 way adjustable struts and shocks in the rear. I have a FlowMaster catback exhaust, K&N filters and a MSD 6A ignition. The car needs paint but is rust free. It currently has an IROC hood and ....the RS's came with the IROC ground effects. It currently is sanded and ready for primer and paint. It runs on GTA wheels ( the lightest factory 3rd gen wheels available) and Toyo Proxies. The interior is in very good condition, as you would imagine a low mileage car to be. The interior is black. It's got a nice Kenwood stereo. I am planning to go propane fuel and found an El Camino. That is the only reason I'm selling. The car has been very reliable and fun to drive. I have everything to convert to V8 including a set of Hotchkis front springs, V8 motor mounts, new Hedman full length headers, a four bolt main 350 block, aluminum driveshaft, Spohn crossmember for T5 or 700R4, Spohn T56 six speed crossmember (take your choice on one or the other), Pictures for the car are available if you are interested. Send me your e-mail address.
Last edited by wesilva; Sep 14, 2007 at 12:09 PM.
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 13
Likes: 0
From: Pittsburg, Ks
Re: Third Gen in SE KS
I'm not looking to travel that far
----------
Anything nearby at all? Willing to trade my motorcycle, mustang, truck, cash or all of the above for the right car
----------
Anything nearby at all? Willing to trade my motorcycle, mustang, truck, cash or all of the above for the right car
Last edited by Justino_15; Sep 14, 2007 at 11:01 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM