Anyone have pics or can describe how they have their systems set up in their convert? We are a rarer breed and need to help each other out. I have two 10" subs, two 8" subs 2 pair of 6x9s and some tweets I need to set up....so I need some placement help ideas. Thanks for the help!
Mike

 

6x9's in the back side panels, tweets in the top left and top right of the plastic window panels, and if you dont mind not having a back seat you could get a good box built for 150 to work in place of the back seat, ...or you can get a good ported box and stick it in the truck and let it rattle to death

 

you could get a box built for two tens in the well just fine, and withthe top down it does not take away that much, and as long as you don't have kappas or possible reference 6x9s you should be ok, i could not get my kappa 6x9s to fit at all, there is possible way, i tryed EVERYTHING. so i ordered reference 5x7s, i am gonna try them and if that does not ihave a friend that wants them andi am gonna get kappa 6 1/2s. and i also have a single 12" box in the back with 1.3 cu feet, if you want two tens you could get about 1 to 1.25 easily for each sub. the only differnce is that we have those two support by the front of the well, you could eaisly work around them.

 

I am still working mine out, I have Kenwood 6x9's in the rear with JBL 10's in the trunk. The JBL's need very little airspace to hit so I can confine the box to the lower well and keep some trunkspace for long trips. When I get it straight I will post pics. Oh and an MTX road thunder amp in the spare tire well.

 

ive got infinity 4x6's up front and infinity 6 1/2's in back with a pioneer deh 8400.

no subs yet but im looking to install 2 perfect 12s powered by a jbl amp within the next 6 months.

off topic but anyone know where to get a new top pretty cheap? mine got cut for the second time and im not about to raise my insurance rates again over something small. thanks