My 88 Formula came stock w/ the 5_1/4 and 4x6 in the sail panels. I have long since removed the "plastic boxes" that encased them, and thrown them out. I have a set of 6x9s that I would like to put in place, but not sure of the best way to make this happen. Is the cut-out the same in all 3rdgen sail panels, that way I could go to a junkyard and pick-up an adapter plate for the 6x9s or are cars stocked w/ 6x9s bolted strait do the body?

 

in my 87 camaro i had the bose setup so i didnt have speakers in my sails......so i had to put some in there.....all i needed were the 6x9 plates out of another camaro....and it will bolt right in under the plastic there are already holes and everything........is this what u are asking?

 

If your'e telling me that there's a plate for 6x9's then you answered my question. Thank you

 

yes

 

Well, if you didnt throw the old ones away, you could have used those, my 84Z had the same ones and I just cut em to fit the 6*9's in... Oh well

 

I unfortunately did throw them away. I did becuse they were cracked and rattling like crazy, there was no reason to keep them @ the time.