Heres the question.
I just got a set of kicker 8" midbass speaker.I have the speakers crossed at 80 from the deck.What do i use to get rid of the highs in the midbass.

 

You need to bandpass them. I assume the deck is high passing at 80Hz since you still have highs coming thru. You can install a low pass passive crossover above the 80Hz crossover point to create the bandpass. Easy to make, progressively harder the higher the order crossover you go.

 

What would be a good crossover to cut the highs out

 

What other speakers are you using?

 

4x6 upfront 10" tube for sub

 

Are you running any type of bass blockers on the 4x6s? I would suggest maybe 250Hz and experiment from there to see what sounds best to you. I wouldn't normally cross the 8s so high, but a 4x6 wont put out too much mid and thats you next size down speaker.

 

hey Anth, nice Iroc. I saw it in the parking lot at the Syracuse nationals when I was up there.

 

Thanks for the compliment,I still have alot of work let to do to it.hopfully ill have everything done by the end of next year.

Anthony