its made out of cardboard, going to build the real deal in a couple of days, here are a few pics.
2
3
Member
damn...you beat me to it! I was gonna do that for real next week...nice job...let me know how it turns out...
will do, i'm gonna do up the dimesions now and post up the pic for peopel wondering, so please dont kill it mods,
ok here are the dimensions, to get the left side make two right sides and cut it off after the angle, cause i made this to fit on left side of the back with it up on the ledge, i dont have the measurements for those pieces, but once you make these ones it is easy to get them, i think the one that is the bottom of the box over the ledge is 4"X10", and if the measurements dont seem to add up to you its because i made it so the front and back will use the thickness of the sides so i needed to take off the 3/4" on each side, so if you use 1/2" mdf it wont work you need 3/4", picture is not in any way close to scale
Supreme Member
Hey, I was thinking the samething too, though I was gonna use a 10 instead.. any pics of the cardboard pattern in the car..