Was hoping someone might know the correct locations for the following harness (see below). I'll hopefully be upgrading in the coming months, but for now, I need a freaking radio lol. The wires are as follows, and any help would be greatly appreciated....

Alpine 7816

Black
Yellow
Red
Pink w/White Stripe
Blue
Blue w/White Stripe
Grey
Grey w/Black Stripe
White
White w/Black Stripe
Green
Green w/Black Stripe
Purple
Purple w/Black Stripe



Thanks again...!!!!

red is power black is ground yellow might be acc then the seaker wires i lost my diagram and tested it one by one.

^ so your saying that Red is Constant, Yellow is Ignition (Key On), Black is Ground....?

From the picture, it appears that the speaker wiring would be the two; Grey, White, Purple and Green wires. Pretty sure that Blue is the antenna, although I forget why there are two of them, and the Pink one has me scratching my head lol. Thanks....

-Rob

Actually no, that's wrong. Our Yellow is switched, which would make their Red switched, and their Yellow continuous. I'm going to simply tape off their Pink, and follow up w/the results for the archives....

Grays and purples are the rights. Whites and greens are lefts. Whites and grays front. Purples and greens are rear. Striped wires are negative. Pink is probably a cel phone mute back when hands free kits were popular.

^ Thank You....!!!!!

Good Luck, Should be easy!
JXS