Install question

Subscribe
May 22, 2001 | 12:13 AM
  #1  
Installing a radio from Crutchfield and I am getting the wire harness with it for the original radio. The jerkface that owned the car before me ripped the harness out but the wires are still their. Has anyone gotten a radio from them and how hard will it be to hook it up with out the harness?

------------------
88 White Formula 305 TBI With Abosulty Nothing Done To It!
Reply 0
May 22, 2001 | 09:41 AM
  #2  
you'll need a wiring diagram to figure out what wires are for what speakers. Or, if worse comes to worse, just take out your speakers and look at what colors are going to them & match them up w/ the wires on your new receiver (those wires should be labeled w/ printing right on the wire).

[This message has been edited by 2ManyWants (edited May 22, 2001).]
Reply 0
May 22, 2001 | 11:52 AM
  #3  
P o w e r
Memory (+12v Constant) Orange
Ignition (+12v Switched) Yellow
Ground (-) Black
Illumination Gray
Dimmer Brown
Power Antenna Pink
S p e a k e r s
Right Front (+) Light Green
Right Front (-) Dark Green
Left Front (+) Tan
Left Front (-) Gray
Right Rear (+) Dark Blue
Right Rear (-) Light Blue
Left Rear (+) Brown
Left Rear (-) Yellow
Reply 0
Subscribe