ok here is the setup
Head unit Kenwood krc-508s (2 sets 1.8v pre outs)
front: audio bahn 4x6 separates
back: pioneer 6x9
subs: RF punch xlc's
amp1: Pyramid 4 channel 300watt older series(purple)
amp2: Pyramid 2 cahnnel 200watt older series (blue)

I know they are some crappy amps but....

no matter how i wire the subs
which set of pre outs i use
or how manny subs i run
i get a very constant clicking/poping noise (especially when the music is down when i have it crank up its barely there)
at first i thought it was the crappy 200
then my buddy gave me a 300 i figured it woul disappear. but i wired it up and low and behold its back S.O.B. i'm pulling every thing so that i can check today any suggestions.

------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."

 

if you think its the amps, got another amp laying around or anything? Pyramid is just a piece of metal...

 

any other suggestions? i'm going to try borrowing my buddy's jensen but i don't know about them either.....
HEEEELLLLPPP!!!!!


------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."

 

Are you powering the 6x9 and 4x6's off one of the amps? How does the system sound without the subs hooked to an amp? I wonder if you fried a speaker, and it's shorting internally. I'd say pull all the speakers but one, and keep adding speakers back in until you hear the popping.


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!

 

its just the subs all the others are fine....
today i ruled out the head unit cables and subs its either the amp or power wiring

------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."