Whoo Hoo! I just got another pair of Boston 746 Plates!
Thread Starter
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Whoo Hoo! I just got another pair of Boston 746 Plates!
I'm happy 
I've had a pair of 746 plates since I was in high school (mid 90s -yikes!!) and I have yet to find a 4x6 that sounds nearly as good. Now that I need tunes in the GTA and I don't have the time and the patience to build another set of kicks right now, I wanted to get another pair of 746s. I remembered that the place I used to work in Rochester had 1 box left, stuffed up on the top shelf in the warehouse. My buddy is coming up this weekend, so I had him stop in and sure enough, they're still there. So, he bought them and I'll have them by this weekend.
Guess it's time to break out the heat gun and the razor to make these fit.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
I've had a pair of 746 plates since I was in high school (mid 90s -yikes!!) and I have yet to find a 4x6 that sounds nearly as good. Now that I need tunes in the GTA and I don't have the time and the patience to build another set of kicks right now, I wanted to get another pair of 746s. I remembered that the place I used to work in Rochester had 1 box left, stuffed up on the top shelf in the warehouse. My buddy is coming up this weekend, so I had him stop in and sure enough, they're still there. So, he bought them and I'll have them by this weekend.
Guess it's time to break out the heat gun and the razor to make these fit.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
2011 Norwood Gathering
ThirdGen Firebird Rep
ThirdGen Firebird Rep
Joined: Jun 2000
Posts: 3,435
Likes: 4
From: Sarasota FL
Car: 99 WS6 / 00 SS / 11 CTS-V / 13 300
Engine: LS1 / LS1 / LSA / 5.7 Hemi
Transmission: 4L60E / T-56 / 6L80E / W5A80
Axle/Gears: 3.23 / 3.42 Auburn / 3.23 / 2.62
I love my 746s ....and my RX97s, and my RM6s
Why do you need the heat gun to make them fit??? Mine fit fine
....and my RX97s, and my RM6s Why do you need the heat gun to make them fit??? Mine fit fine
Supreme Member
iTrader: (2)
Joined: Jun 2001
Posts: 1,878
Likes: 0
From: northeast ohio
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
not enough clearance on the dashpad, so the speaker holes that are molded in need to be trimmed. jim wrote a tech article about it.
------------------
Robert
1984 Camaro SC. getting a Trans Am front suspension, and a 350 that i would like to get 360 horse out of. More details to follow!
------------------
Robert
1984 Camaro SC. getting a Trans Am front suspension, and a 350 that i would like to get 360 horse out of. More details to follow!
Thread Starter
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
They fit in camaros (well, pre 90 models anyway) with no mods, but in the firebirds the heater box and some other plastic gets in the way.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
2011 Norwood Gathering
ThirdGen Firebird Rep
ThirdGen Firebird Rep
Joined: Jun 2000
Posts: 3,435
Likes: 4
From: Sarasota FL
Car: 99 WS6 / 00 SS / 11 CTS-V / 13 300
Engine: LS1 / LS1 / LSA / 5.7 Hemi
Transmission: 4L60E / T-56 / 6L80E / W5A80
Axle/Gears: 3.23 / 3.42 Auburn / 3.23 / 2.62
Ah...makes sense then
Thread
Thread Starter
Forum
Replies
Last Post
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 29, 2015 10:08 PM
monte87cortez
Transmissions and Drivetrain
2
Sep 26, 2015 08:10 PM