Hey guys i was wondering if i would need to replace my throttle and trans cables or if i could use the stock tpi cables on a carb setup. Thanks in advance

 

The best route seems to be to replace them with carb model items.

 

what about the throttle cable mounting bracket? where is the best place to get this?

 

I used a holley throttle bracket, with a TBI cable.

I also used the stock 700R4 cable.

Here is the link for the Throttle bracket.

HLY-20-95

 

Thanks guys, i rigged everything up and it works. now i need to figure out an easy way to route fuel.

 

I used the stock lines with the intank TPI fuel pump. I used the mallory 3-port return style AFPR. I had new fittings put on the stock rubber lines and ran a braided line to the carb.

Mallory AFPR

 

alright thanks, ill have to grab one of those. ive been missing being able to drive my car, its been sitting for three months while ive been in the conversion process. So ive been driving a 76 ford f100 with a weak I6... no fun at all.