i am using a non computer control Qjet on my 350 and i need to choose metering rods and hangers for it.

The motor has about 9.5:1 comp, .454/.454" lift, 218 adv. dur, cam, edelbrock performer intake, edelbrock headers and full 3 in exhuast, non CC HEI distributer, with MSD wires etc... i want this thing to making about 300-310 crank horsepower after it's all tuned. so what parts should i be looking at to tune the carb right?

thanks for the help.
Eric

 

Do you know what pri-rods, sec.-rods,jets and hanger you have in your carb at the present?