Hawks Convertible Light Bar - BUY IN
#1
Junior Member
Thread Starter
Hawks Convertible Light Bar - BUY IN
Alrights guys.... So exchanged a couple emails with Ryan at Hawk's, and the convertible light bar can be produced, however, would need a "buy-in" of at least 10 people to get the ball rolling. Price still needs to be confirmed with Bruce, but figure we could get a list going of those that would be interested.
For those that haven't seen, the link is below:
http://www.hawksmotorsports.com/cama...ble-light-bar/
So for those that want to purchase, please add you name to the list.
1) west1nm
2) blacksunshine91'
3) Crashbandit63
4) jhawk73
5)
6)
7)
8)
9)
10)
For those that haven't seen, the link is below:
http://www.hawksmotorsports.com/cama...ble-light-bar/
So for those that want to purchase, please add you name to the list.
1) west1nm
2) blacksunshine91'
3) Crashbandit63
4) jhawk73
5)
6)
7)
8)
9)
10)
Last edited by west1nm; 05-15-2018 at 12:44 PM.
#2
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,377
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Hawks Convertible Light Bar - BUY IN
I am interested.
#6
Junior Member
Thread Starter
Re: Hawks Convertible Light Bar - BUY IN
I believe these were $499 when they were available before, but Ryan/Bruce needs to confirm
#7
Junior Member
Join Date: Mar 2011
Location: Eastern NC
Posts: 7
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Iroc
Engine: 89 Calloway Corvette 350
Transmission: 700R4
Axle/Gears: 3:73
Re: Hawks Convertible Light Bar - BUY IN
When you guys say light bars do you are talking about a roll bar that has interior lights built in it correct
Trending Topics
#10
Junior Member
Thread Starter
#11
Junior Member
Join Date: Mar 2011
Location: Eastern NC
Posts: 7
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Iroc
Engine: 89 Calloway Corvette 350
Transmission: 700R4
Axle/Gears: 3:73
Re: Hawks Convertible Light Bar - BUY IN
I was thinking it was going to be like a chrome Molly 4140 type material and it was going to have map lights or interior lights in it Super Chevy or Camaro performers have a guy who did a third GEN Camaro convertible and he actually made his and sold 10 of them and never made another one so I was hoping it was this guy producing more of them
#12
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,377
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Hawks Convertible Light Bar - BUY IN
#13
Junior Member
Join Date: Mar 2011
Location: Eastern NC
Posts: 7
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Iroc
Engine: 89 Calloway Corvette 350
Transmission: 700R4
Axle/Gears: 3:73
Re: Hawks Convertible Light Bar - BUY IN
I will look back through some of my old issues and post something. Even if it’s just a few screen shots of the article.
The following users liked this post:
dlinger (02-12-2021)
#15
Member
iTrader: (2)
Re: Hawks Convertible Light Bar - BUY IN
Alrights guys.... So exchanged a couple emails with Ryan at Hawk's, and the convertible light bar can be produced, however, would need a "buy-in" of at least 10 people to get the ball rolling. Price still needs to be confirmed with Bruce, but figure we could get a list going of those that would be interested.
For those that haven't seen, the link is below:
http://www.hawksmotorsports.com/cama...ble-light-bar/
So for those that want to purchase, please add you name to the list.
1) west1nm
2) blacksunshine91'
3) Crashbandit63
4) jhawk73
5)
6)
7)
8)
9)
10)
For those that haven't seen, the link is below:
http://www.hawksmotorsports.com/cama...ble-light-bar/
So for those that want to purchase, please add you name to the list.
1) west1nm
2) blacksunshine91'
3) Crashbandit63
4) jhawk73
5)
6)
7)
8)
9)
10)
I wonder if there is any way to naybe reinforce it to make it more functional than just looking good.
#17
Member
iTrader: (10)
Join Date: Jul 2005
Posts: 224
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1989 Iroc convertible
Engine: 305
Transmission: T5
Axle/Gears: 3.08 posi
Re: Hawks Convertible Light Bar - BUY IN
Is this still going on? Does anyone have pictures installed. I always wanted to know how it fastened to interior.
#19
Member
Join Date: Mar 2000
Location: Land O Lakes, FL
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Re: Hawks Convertible Light Bar - BUY IN
I would be interested in one if this gets any traction.
Whats the update on this one?
Whats the update on this one?
#21
Member
Join Date: Mar 2000
Location: Land O Lakes, FL
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Re: Hawks Convertible Light Bar - BUY IN
I’m reaching out to hawks since the original poster doesn’t seem to be responding.
#24
Member
Join Date: Mar 2000
Location: Land O Lakes, FL
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Re: Hawks Convertible Light Bar - BUY IN
I tried calling multiple times, left a lot of messages and couldn’t get a call back from anyone. I’m really disappointed in them as a vendor. I’d rather be told no vs. just being ignored. Terrible service.....
#26
Member
Join Date: Mar 2000
Location: Land O Lakes, FL
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 5.7
Transmission: 700R4
Axle/Gears: 3.27
Re: Hawks Convertible Light Bar - BUY IN
I did and they dont want to mess with it. R&D will be to costly for the limited demand. They said if hawks has a working design already that is the most cost effective path.
If we had a enuf people calling hawks and putting pressure on them maybe it would motivate them.
If we had a enuf people calling hawks and putting pressure on them maybe it would motivate them.
#29
Senior Member
Re: Hawks Convertible Light Bar - BUY IN
By itself, this item seems pointless. Now if it was upgraded as a wind deflector, then we might be in business.
#30
Member
iTrader: (4)
Re: Hawks Convertible Light Bar - BUY IN
Tought about it for a while! I took my wind deflector from my 2012 Camaro and it is way too narrow for our 3rd gen... was looking after some custom fabs but it would be hard to make it look 3rd gen equipment! But IMO the light bar adds a nice final touch to the long convertible body and tonneau cover. On an opposite way, only a wind deflector wouldn't look good as newer 5th or 6th gen because of the body lines
I am still ready to hit the target for this bar in the 500$ price tag era! Back then I was tempted but had so much more important things to do with this precious 500$
I am still ready to hit the target for this bar in the 500$ price tag era! Back then I was tempted but had so much more important things to do with this precious 500$
#31
Junior Member
Thread Starter
Re: Hawks Convertible Light Bar - BUY IN
Thought we would have more interest in this... perhaps more of us should contact hawks?
#32
Senior Member
Re: Hawks Convertible Light Bar - BUY IN
Apparently someone has used a BMW deflector before, and it worked pretty well with some modification. One thing that sucks with the mod is it really interfered with the backseat, getting in and out.
I realize our backseats are practically useless, and painful when used, but It's still annoying.
Would have been great if Chevy could have eeked out a couple more inches back there....
I realize our backseats are practically useless, and painful when used, but It's still annoying.
Would have been great if Chevy could have eeked out a couple more inches back there....
#35
Junior Member
Join Date: Sep 2020
Location: Dallas Tx
Posts: 1
Received 0 Likes
on
0 Posts
Car: 91 camaro RS
Engine: Ls1
Transmission: T56
Axle/Gears: 373
#36
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,377
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Hawks Convertible Light Bar - BUY IN
#37
Senior Member
iTrader: (6)
Re: Hawks Convertible Light Bar - BUY IN
I actually found a lightbar. I don't believe Hawk's will ever come back out with them. As long as I hunted & wanted one, my taste changed and not going to install mine. I just test fitted the bar & decided I am going to sell the car
#39
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,377
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Hawks Convertible Light Bar - BUY IN
Eldon
The following users liked this post:
rarebmx (02-11-2021)
#40
Member
Re: Hawks Convertible Light Bar - BUY IN
If this is an used Hawks light bar I would be interested as well.
#41
Senior Member
iTrader: (6)
Re: Hawks Convertible Light Bar - BUY IN
I'll answer some questions tomorrow if I have some free time. I am pretty busy with my plow truck & more snow on the way. I apologize for any delay in responses.
This is when I was test fitting it to see if I was willing to make the commitment to install but decided to sell the car. It is not bolted in but I wanted to see if I was going to make some tweaks or attempt to remake some with subtle changes.
I searched for years to find one. I even went to Hawk's in SC & was willing to lay down $5000+ to see if Bruce would make 10 of them. I couldn't even get a meeting.
I jumped through some hoops and found this one out West & had to have cash in the guys hands the day I talked him out of it. Luckily I had a cousin who lived about an hour from him. It wasn't cheap but when's the last time you saw one for sale at any price? I believe Hawk's was selling them for over $500+ shipping (Fright or oversized).
I'll get with potential buyers once I get this plow truck sorted out.
.
This is when I was test fitting it to see if I was willing to make the commitment to install but decided to sell the car. It is not bolted in but I wanted to see if I was going to make some tweaks or attempt to remake some with subtle changes.
I searched for years to find one. I even went to Hawk's in SC & was willing to lay down $5000+ to see if Bruce would make 10 of them. I couldn't even get a meeting.
I jumped through some hoops and found this one out West & had to have cash in the guys hands the day I talked him out of it. Luckily I had a cousin who lived about an hour from him. It wasn't cheap but when's the last time you saw one for sale at any price? I believe Hawk's was selling them for over $500+ shipping (Fright or oversized).
I'll get with potential buyers once I get this plow truck sorted out.
.
#42
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,377
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Hawks Convertible Light Bar - BUY IN
I remember somebody here on TGO had one for sale about ten years ago for $350, but that was before I had my convertible.
#43
Senior Member
iTrader: (6)
Re: Hawks Convertible Light Bar - BUY IN
To eliminate confusion, I'm probably going to be at $800 for mine. If I was still into the convertibles as much as I once was (no into hardtops, go figure), I would have gladly spent whatever the cost was because they look killer & no one is giving theirs up. I offered $1000 for one about 4 years ago. It didn't motivate the owner
#44
Member
iTrader: (10)
Join Date: Jul 2005
Posts: 224
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1989 Iroc convertible
Engine: 305
Transmission: T5
Axle/Gears: 3.08 posi
Re: Hawks Convertible Light Bar - BUY IN
I would have bought that for $350 mine isn't going to be $350 though. Heck, what's a set of OEM window louvers with hardware bringing? 10 years ago, those were about $100, possibly $200 with hardware.
To eliminate confusion, I'm probably going to be at $800 for mine. If I was still into the convertibles as much as I once was (no into hardtops, go figure), I would have gladly spent whatever the cost was because they look killer & no one is giving theirs up. I offered $1000 for one about 4 years ago. It didn't motivate the owner
To eliminate confusion, I'm probably going to be at $800 for mine. If I was still into the convertibles as much as I once was (no into hardtops, go figure), I would have gladly spent whatever the cost was because they look killer & no one is giving theirs up. I offered $1000 for one about 4 years ago. It didn't motivate the owner
Thread
Thread Starter
Forum
Replies
Last Post