here is how i am gonna wire up the dual fans. i had a single fan originally and i have my fuel pump relay that i am not using so that is the relays i am using. for the connectors that go into the fan i am going to use stander 1/4" female connectors. once again i am using tranny cooler ties with washers. how far should i get the fan mounting tabs from my radiator?

 

here is the fan switch i want to use with a 180* stat


http://www.jegs.com//cgi-bin/ncommer...74&prmenbr=361

 

looks good, so basically you cut out the ecm side of it, and are are taking the f wires on each relay and hooking it up to the fan switch, so when the fan switch detects the 200 temp it will ground both relays and turn on the fans..

the only thing i can think of that you might need to do is for safety reasons install a manual switch just incase the fan switch malfunctions you can turn on the fans without overheating.....

 

yeah i might do that. thanks