Griffen Radiator
Senior Member
iTrader: (1)
Joined: Apr 2004
Posts: 536
Likes: 0
From: Prescott Valley AZ
Car: 87 Iroc Showcar - Saturday Nite Hun
Engine: 383 4-Bolt Truck Hyd Roller MiniRam
Transmission: B&M 700R4 - Edge 3200
Axle/Gears: BW 9 Bolt-TA Cover & Stud Kit - 3.2
Griffin
Hi,
6-582AE-BAX
Thats the Griffin number for the 2- 1.25".
Went direct to Griffin for it to save a few bucks but after shipping
from them pretty much a wash.
This the big one for our cars and supposedly handles 600 to 650
HP
I made sure it had heater hose outlet and AT setup as running to
the Radiator before going to the cooler.
It sure polishes out nice.
Hope this helps.
Later
Irocing
6-582AE-BAX
Thats the Griffin number for the 2- 1.25".
Went direct to Griffin for it to save a few bucks but after shipping
from them pretty much a wash.
This the big one for our cars and supposedly handles 600 to 650
HP
I made sure it had heater hose outlet and AT setup as running to
the Radiator before going to the cooler.
It sure polishes out nice.
Hope this helps.
Later
Irocing
Last edited by jaykar; Dec 11, 2005 at 03:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
