Replace Tranny cooler lines with Hose what fittings would be best?

Search this Thread

Nov 12, 2008 | 11:43 PM

#1

Thread Starter

Supreme Member

Hi

Will replace the steel lines with braided hose and wonder if I should go straight or 45deg fittings on the tranny?

On the cooler side I'll use one straight and one 90deg.

Will use 1/4 NPT to AN6 adapters on the tranny/cooler.

Nov 13, 2008 | 10:52 AM

#2

Moderator

Re: Replace Tranny cooler lines with Hose what fittings would be best?

I think I used straight on mine.

Nov 13, 2008 | 08:32 PM

#3

Supreme Member

Re: Replace Tranny cooler lines with Hose what fittings would be best?

i used two 90*

Nov 14, 2008 | 01:06 AM

#4

Member

Re: Replace Tranny cooler lines with Hose what fittings would be best?

two 45*s was a good angle. straight will probably work fine though. dont you have to use teflon lined hose for the trans lines?

Nov 14, 2008 | 02:57 PM

#5

Moderator

Re: Replace Tranny cooler lines with Hose what fittings would be best?

No, only for brake fluid.

Tags 44, change, coole, cooler, cooling, cost, doe, fittings, hard, hose, l480e, line, lines, replace, sit, transmission

Reply to Thread

Related Topics

1