has anyone ever tried using 2 of the regular single fans to make a dual fan setup?iwas thinking there maybe a possibility of it working by fabricating a frame & altering the shroud. any thoughts on it? i was also wondering if anyone has tried using 4th gen wheels on a 3rd?if you did,what mods/extras (if any) did you need?found a set that are pretty much new with nice tires for $350,just dont wanna spend it if i cant use the rims.

 

I think you'll have a space problem with 2 single fans -- wider
than the radiator. Easy enough to confirm with a tape measure.

Wheels should be the same bolt pattern. There might be an
an offset issue, but some of the brain-trusts here on ought to
be able to clear that up. If you can take pictures of them,
mount one up front & rear, than carefully check clearances:
rotate, & turn the front wheel, rotate the rear. If you have
posi, you'll have to lift both wheels. And the obvious --
always use static safety devices (jackstands, blocks, etc.)
and if you're checking clearance, lift at the suspension, not
body/frame.

Good luck, those look like a decent buy.

 

I can sell you a duel fan set up. I have a couple of them