Car squels after reaching operating temp.
Thread Starter
Junior Member
Joined: May 2010
Posts: 36
Likes: 0
From: missouri
Car: 91 Camaro RS
Engine: 350 carb'd
Transmission: 700r4
Car squels after reaching operating temp.
Ok, so first off I have posted this problem before but im still unable to fix the problem. The problem is that once my car reaches 200 degrees after staying at 200 for a minute or two it drops back down to 180, im not sure if this is the thermostat or what but after it drops back down to 180 the car starts squealing. It sounds like a belt squeling or something but it only does it with heat so I'm not sure what it is. Any help is greatly appreciated
Member
iTrader: (1)
Joined: Aug 2007
Posts: 341
Likes: 1
From: Litchfield Park
Car: '91 1LE
Engine: 377 w/Stealthram
Transmission: T56
Axle/Gears: 3.42 Torsen
Re: Car squels after reaching operating temp.
The water pump may be leaking out of the weep hole on the bottom when warm. The coolant drips right on the belt and causes it to slip/squeal.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM