replace heater hot water valve
Thread Starter
Member
Joined: Mar 2010
Posts: 116
Likes: 0
From: az
Car: 92 camaro rs anniversary edition
Engine: v8 5.0 Tbi
replace heater hot water valve
I have a leak from the heater hot water valve on my 92 v8 tbi camaro, am wondering if I can just mark the hoses and replace? Do I need to bleed the air out somehow? From other posts there seems to be a lot of concern about that.
Joined: Feb 2012
Posts: 709
Likes: 2
From: S.New Jersey
Car: 90 Iroc Vert
Engine: 5.0L
Transmission: 700R4
Axle/Gears: 3.73
Re: replace heater hot water valve
Naa, heater valve is easy, just unclamp it and pop a new one on. As you take the hoses off push them up to prevent AF from running out. Very small loss.
Thread Starter
Member
Joined: Mar 2010
Posts: 116
Likes: 0
From: az
Car: 92 camaro rs anniversary edition
Engine: v8 5.0 Tbi
Re: replace heater hot water valve
Thanks so much Jersey, nice cheap fix too 
do I need to use any silicone or lubricant?
do I need to use any silicone or lubricant? Last edited by scarr001; Nov 29, 2013 at 04:13 PM. Reason: question
Joined: Feb 2012
Posts: 709
Likes: 2
From: S.New Jersey
Car: 90 Iroc Vert
Engine: 5.0L
Transmission: 700R4
Axle/Gears: 3.73
Re: replace heater hot water valve
Very little if any. This is easier than screwing in a light bulb, just jump in and do it !
A 5/16" nut driver or ratchet works better than a screw driver on the clamps.
A 5/16" nut driver or ratchet works better than a screw driver on the clamps.
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
Aug 12, 2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM