Newbie alert. What bin to start with?
Thread Starter
Senior Member
Joined: Jun 2001
Posts: 920
Likes: 0
From: Saskatchewan
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
Newbie alert. What bin to start with?
Just betting into this prom burning thing. Should I find a bin that somewhat matches what I am running for a starting point?
Supreme Member
Joined: May 2000
Posts: 2,963
Likes: 3
Car: 1982 Z28
Engine: LS1
Transmission: T56
That's a sweet engine ya got there!
If you're still running MAF, then ARAP is a good starting place but dial down the main spark table big-time...FastBurns are documented as making peak power at ~34deg BTDC total advance and ARAP has much more than that in all the wrong places.
ARAP is 1989 vintage code, most cutting-edge for the '165 MAF ECM.
Let us know how it goes, I eyeballed FastBurn heads for mine but want to see more real-world data on them.
If you're still running MAF, then ARAP is a good starting place but dial down the main spark table big-time...FastBurns are documented as making peak power at ~34deg BTDC total advance and ARAP has much more than that in all the wrong places.
ARAP is 1989 vintage code, most cutting-edge for the '165 MAF ECM.
Let us know how it goes, I eyeballed FastBurn heads for mine but want to see more real-world data on them.
Thread
Thread Starter
Forum
Replies
Last Post