Cable unit to connect to eprom

Reply Subscribe

Thread Tools

Search this Thread

Jul 24, 2002 | 12:10 PM

Dale

Thread Starter

TGO Supporter

iTrader: (12)

Joined: Jun 2002

Posts: 6,819

Likes: 3

From: AR

Car: 1991 Camaro RS Vert

Engine: 350 S-TPI

Transmission: T5

Axle/Gears: GU5/G80/J65

Cable unit to connect to eprom

Whats the best place to get the cable, or on desk unit to start burning my own eproms? I have a 1991 camaro, and I would also like to attempt to do this on my 1993 s10. I am thinking of using the tunercat program. Thanks :hail:

Jul 24, 2002 | 04:42 PM

YenkoZ28

Member

Joined: Feb 2002

Posts: 243

Likes: 0

Car: 1991 Z28

Engine: 305 TPI under 14 psi

Transmission: aftermarket T56

Axle/Gears: Moser 12 bolt 3.08 gears

Go to the announcement at the top of this board and read Traxions guide. In his guide you will find a link to xtronics pocket programer. I am using it with AT29C256 eePROMS and it works great. You can get the eePROMS from Graig Motes. And don't forget you'll need a ZIF to ECM setup to plug the chips in easier. Good luck

Jul 24, 2002 | 05:48 PM

IROCZ88

Member

Joined: Feb 2001

Posts: 464

Likes: 0

From: Lenhartsville, PA

What cable?!?

Aug 4, 2002 | 09:00 AM

Sarkee

Member

Joined: Jul 2001

Posts: 198

Likes: 0

From: Western NY area, USA

Re: Cable unit to connect to eprom

Quote:

Originally posted by Dale
Whats the best place to get the cable...

Software to d/l the BIN to your laptop is on Craig Moates' page (see sticky at top) as well as links to cable mfg's...

I use an AKM cable...(Beware of cheap rip-offs)...

I also use Tunercat...I have a hard time keeping up with all the updates...