Prom Burning
Supreme Member
Joined: May 2002
Posts: 4,099
Likes: 2
Try looking at the top of this page, or go here. https://www.thirdgen.org/techbb2/ann...?s=&forumid=16
Supreme Member
Joined: May 2000
Posts: 2,963
Likes: 3
Car: 1982 Z28
Engine: LS1
Transmission: T56
Re: Prom Burning
Originally posted by camaro89rs355
WHAT DO I NEED TOO START BURNING MY OWN CHIPS? I NEED A LIST OF EVERYTHING.
WHAT DO I NEED TOO START BURNING MY OWN CHIPS? I NEED A LIST OF EVERYTHING.
Senior Member
Joined: Apr 2000
Posts: 948
Likes: 0
From: Tacoma WA, USA
I'll make it real simple for you.
1 go to ebay adn get a cheap laptop that can run w95 or better
2 get tunercat
3 get Craig moates software or diacom
4 get an aldl cable from steve ruse or Andrew matti..or make ti your self.
5 get a pocket programer
Should cost you in the ball park of 300 bucks for everything, maybe a little more/ maybe less.
Make sure you read the intro article from Traxion and the stick posts.
Good luck and welcome!
1 go to ebay adn get a cheap laptop that can run w95 or better
2 get tunercat
3 get Craig moates software or diacom
4 get an aldl cable from steve ruse or Andrew matti..or make ti your self.
5 get a pocket programer
Should cost you in the ball park of 300 bucks for everything, maybe a little more/ maybe less.
Make sure you read the intro article from Traxion and the stick posts.
Good luck and welcome!
Thread
Thread Starter
Forum
Replies
Last Post