what bin should I start with for the $32B 165 ecm... I looked on the GM-ecm board and didnt find any.... I tried to open ARAP with tuner cat and says that it is needs a different definition file..... where can I get the stock bin and work from there..... tried a search and nothing came up.

 

Try here; ftp.diy-efi.org
There are a whole bunch of bins there. Also, what engine do you have?

 

I am running a TPI 383 MAF. I have the LT1 intake already, but I am waiting until the spring to go ahead and mess with it, so for now I just have the 24# LT1 injectors on the TPI, that is why I wanna start to tune it. Right now I have a hypertech chip that came with the car, and I like a few things about it. Is there a way that I can get the info off that chip and work from there??

 

Dunno if you can read the chip, I've heard that they clip one of the legs on them to prevent it. If you have a leg clipped off yours you can try to solider a flat piece of brass or copper to it so it can be read.

 

I've got an 87 305 tpi 5 spd car and have an after market chip in it I bought about 11 years ago. I've been lookingfor a "stock" bin for my car and haven't been able to find one on any of the sites everyone has recomended.

If you need a copy of my bin, you are welcome to a copy. Just email me.

 

Fst, I have an '88 GTA 350 bin, I think you can find it on the FTP site, it is AWBT. If you can't find it there I'll post it here.

Also check here for some more bins. http://www.eecis.udel.edu/~davis/z28/