I need some help, I need the stock 88 350 tpi auto bin.
I looked here and could not find the bin.
ftp://ftp.diy-efi.org/pub/gmecm/bin_lib/
I did find this bin (abwt88ta.32.bin ) but I am not sure that is the one I need.
The letter code of the stock bin is ABYA, but I can not find that one.
I have the $32B file for Tuner cat already so using the ARAP bin would not work right now.
So everyone knows, it is for one of the guys in the club, he has bigger injectors on the car and all I am going to be changing is the injector consistence for him so it will not be running so rich, the BLM’s are at 80 most of the time

He is going to get all the stuff to do his own chips later and I am not charging him for this and would not do it if he were not in the club

 

Winbin is free,works great and support the 6e code for arap bin.
But if you are dead set then I have a 87 bin I could send you un molested.

 

That would be great.
All I am going to do for him is just set the injector consistence so the motor runs with out drinking alot of gas. When he gets a scanner and starts messing with the chip himself he can change to the ARAP bin.
Just send it to ghosthunter8@excite.com

Thanks again, that save me from having to make an adapter for the PP and read his chip.

 

AWBT bin is for the 88 GTA and is on the FTP site.

 

Morley
Thank you.