Low impedence
Thread Starter
Member
Joined: Sep 2000
Posts: 464
Likes: 0
From: Crestline,OH
Car: 1987 Formula 350
Engine: 6.0 boost and smak
Transmission: 4l80e
Axle/Gears: 9bolt 3.27
Low impedence
here goes,
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
Supreme Member
Joined: Jun 2000
Posts: 1,612
Likes: 0
From: the garage
Car: 84 SVO
Engine: Volvo headed 2.3T
Transmission: WCT5
Axle/Gears: 8.8" 3.73
Re: Low impedence
Originally posted by fun Pain
here goes,
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
here goes,
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
A 165 or 730 will not run 8 P/H injectors.
A 749 can be modified with upgraded FETs to run 8 P/H injectors.
More info can be found on the Syclone/Typhoon site.
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Re: Low impedence
Originally posted by fun Pain
here goes,
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
here goes,
Is there a way to run low impedence injectors on a 165 or 7730 ecm, and if so some insight on how would be nice.....and here is why
I have here 36lb injectors (that is at 36psi), that come from 85 SVO mustangs, and i have like 30 of them, and i would love to use them with my head swap comming up.....
if it can't be done tell me, if not tell me.....
Not without modifing the ecm or using an external *driver board*.
I didn't know of Ford having used P+H Port Injectors.
If they ohm out at about 12-18 ohms a piece they are saturated.
Thread
Thread Starter
Forum
Replies
Last Post