Hunting for rare MCT Programmer Interface Card
Thread Starter
Supreme Member
Joined: Dec 2000
Posts: 2,375
Likes: 0
From: Tucson, AZ, USA
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
Hunting for rare MCT Programmer Interface Card
I'm hunting for an ISA interface card for a Modular Circuit Technology Eprom Programmer (MOD-MEP) .. The setup is a little ancient and parts are no longer available. The interface card is an 8-bit ISA card with a female DB-25 connector on it.. I believe the model of the interface is MOD-MAC, but I could easily be mistaken.
I already have the programmer and cable, but the lack of the silly proprietary interface card is holding me back from doing anything useful with it.
If you have one of these old cards laying around, or know someone who does, your help in this would be muchly appreciated.
I already have the programmer and cable, but the lack of the silly proprietary interface card is holding me back from doing anything useful with it.
If you have one of these old cards laying around, or know someone who does, your help in this would be muchly appreciated.
Supreme Member
iTrader: (2)
Joined: Jan 2002
Posts: 9,962
Likes: 5
From: Moorestown, NJ
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Id be willing to bet that thats going to be hard to find. You might try a computer show. Sometimes there will be a dealer or an old junk section where old outdated stuff goes to die. Ive found lots of old odds and ends there like old IBM token ring cards still in the box, parts to build lasers, antiquated interface and control cards, things like that.
Joined: Jul 2001
Posts: 952
Likes: 0
From: La Porte, IN
Car: 1987 Monte Carlo SS
Engine: L98
Transmission: 200-4R
Axle/Gears: 7.625 10 bolt/3.73s
I did a search on escrew, is this what you are looking for?
http://cgi.ebay.com/ws/eBayISAPI.dll...&category=1247
It has a male connector on it but it is an 8bit isa card.
http://cgi.ebay.com/ws/eBayISAPI.dll...&category=1247
It has a male connector on it but it is an 8bit isa card.
Thread Starter
Supreme Member
Joined: Dec 2000
Posts: 2,375
Likes: 0
From: Tucson, AZ, USA
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
I'm shocked.. that thing's even older than what I've got.
Ah well, if nothing else I've got this box with a nice ZIF socket in it I can salvage.
Ah well, if nothing else I've got this box with a nice ZIF socket in it I can salvage.
Thread
Thread Starter
Forum
Replies
Last Post
sjorgens
Suspension and Chassis
7
Oct 1, 2015 07:54 PM
3.8TransAM
NW Indiana and South Chicago Suburb
1
Sep 27, 2015 08:37 PM
burner, card, circuit, eprom, isa, mct, mctmep, mep, modmac, modmep, modmep1a, modular, programmer, programmers, technology






