First Scan Wanting Some Feed Back
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 623
Likes: 0
From: Point Marion PA.
Car: 1982 CAMARO;
Engine: 1985 LB9;
Transmission: T-5/
First Scan Wanting Some Feed Back
I just received my V8 ANZA memcal, This will almost finish my 870-165 swap, I took a couple of Scans to see if I could get TunerPro and Moates ECM 852 To link with my home made cable, Which they did Fine. I would like someone to look at these and see if there is anything out of the ordinary. In the scans the car isn't running Because It will be another week before I have a Flash N' Burn, HDR1, GP1 so that I can disable VATS and get some scans of the car running.
Bare with me this is my first scan and just wanting some Input on if any sensors look out of range for The car not running.
Here is the link to the .CSV Files
http://www.f-body383.100megsfree5.com/AAB/CSV-Files.htm
Bare with me this is my first scan and just wanting some Input on if any sensors look out of range for The car not running.
Here is the link to the .CSV Files
http://www.f-body383.100megsfree5.com/AAB/CSV-Files.htm
Joined: Jul 1999
Posts: 12,088
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: First Scan Wanting Some Feed Back
Originally posted by MTPFI-MAF
I just received my V8 ANZA memcal, This will almost finish my 870-165 swap, I took a couple of Scans to see if I could get TunerPro and Moates ECM 852 To link with my home made cable, Which they did Fine. I would like someone to look at these and see if there is anything out of the ordinary. In the scans the car isn't running Because It will be another week before I have a Flash N' Burn, HDR1, GP1 so that I can disable VATS and get some scans of the car running.
Bare with me this is my first scan and just wanting some Input on if any sensors look out of range for The car not running.
Here is the link to the .CSV Files
http://www.f-body383.100megsfree5.com/AAB/CSV-Files.htm
I just received my V8 ANZA memcal, This will almost finish my 870-165 swap, I took a couple of Scans to see if I could get TunerPro and Moates ECM 852 To link with my home made cable, Which they did Fine. I would like someone to look at these and see if there is anything out of the ordinary. In the scans the car isn't running Because It will be another week before I have a Flash N' Burn, HDR1, GP1 so that I can disable VATS and get some scans of the car running.
Bare with me this is my first scan and just wanting some Input on if any sensors look out of range for The car not running.
Here is the link to the .CSV Files
http://www.f-body383.100megsfree5.com/AAB/CSV-Files.htm
When your ready send us logs of it running.
Once it is running, you'll wanna adjust your IAC too before you do any tuning.
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
NufNuffZ28
History / Originality
2
Aug 14, 2015 09:12 AM
