starting bin
Thread Starter
TGO Supporter
Joined: Apr 2003
Posts: 338
Likes: 0
From: Maine
Car: 89 Formula 350 WS6
Engine: 383 miniram
Transmission: 700R4
starting bin
what starting bin would you recommend for a 165 ecu with $6e def for the setup listed below and what initial changes would be appropriate?
Member
Joined: Apr 2003
Posts: 333
Likes: 0
From: chicago il
Car: 1987 transam
Engine: 383 /w superram
Transmission: 700r4 /w 2800rpm stall
something real important you didn't mention was your injector size....
you're going to need MAF table work idle work at the very least.. i'd also work over your timing tables to but thats not nessacary unless you're getting knock.
i'd reccamend starting with the AZNA or ARAP
you're going to need MAF table work idle work at the very least.. i'd also work over your timing tables to but thats not nessacary unless you're getting knock.
i'd reccamend starting with the AZNA or ARAP
Thread
Thread Starter
Forum
Replies
Last Post