Data logging
#1
Member
Thread Starter
Join Date: Dec 2001
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: 350 TPI
Transmission: 700R4
Data logging
I'm having problems data logging using tunerpro rt and the auto prom. i got it to connect using com 3 but it doesn't produce any data. After that i changed the interface to auto prom and it won't connect. What am i doin wrong ? Also what is the packet error count ??? I have the horizontal switch away from the usb connector and i have the vertical switch all the way up.
Last edited by 91 z28 350; 01-13-2005 at 08:36 PM.
#2
TGO Supporter
Join Date: Jan 2000
Location: In your ear. No, the other one.
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am WS6
Engine: 350 TPI
Transmission: T5WC
Axle/Gears: 3.08 posi
If the horizontal switch is away from the USB port, you'll want to set TunerPro RT to use the "MAX232" interface type.
I don't believe you need the 10k for your '91, so you can place the vertical switch in the middle position.
You'll need to load the 1227730.ads file.
Additionally, you'll need to confirm which port the AutoProm is utilizing (COM3 or COM4 usually). You can confirm by looking in the device manager (for notes, look here:
http://www.moates.net/documentation....7f9f83ee102283
After that's all set up, click the "connect to ECM" button until it connects (for the 7730, it shoud connect on the first or second try).
M
I don't believe you need the 10k for your '91, so you can place the vertical switch in the middle position.
You'll need to load the 1227730.ads file.
Additionally, you'll need to confirm which port the AutoProm is utilizing (COM3 or COM4 usually). You can confirm by looking in the device manager (for notes, look here:
http://www.moates.net/documentation....7f9f83ee102283
After that's all set up, click the "connect to ECM" button until it connects (for the 7730, it shoud connect on the first or second try).
M
#3
Member
Thread Starter
Join Date: Dec 2001
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: 350 TPI
Transmission: 700R4
I got i t to work and then all of a sudden when i try to do it again it stops working. I dunno i borrowrd a friends laptop and it has alot of problems so it my just be the computer it self.
Thread
Thread Starter
Forum
Replies
Last Post