BJWS Broadcast, what mask?
Thread Starter
Member
Joined: Nov 2004
Posts: 126
Likes: 0
BJWS Broadcast, what mask?
Pulled the chip tonight off.
ECM is a 16197427 and label matches the memcal with same broadcast cost
BJWS
Haven't found any reference on web anywhere on this broadcast code.
I have some bins loaded up if anybody wants to take a peak and figure out the mask.
www.nwstp.com/jsm/bjwsc256.bin
www.nwstp.com/jsm/bjwsc512.bin
tried pulling it on my pocket programmer as both a 256 and 512.
ECM is a 16197427 and label matches the memcal with same broadcast cost
BJWS
Haven't found any reference on web anywhere on this broadcast code.
I have some bins loaded up if anybody wants to take a peak and figure out the mask.
www.nwstp.com/jsm/bjwsc256.bin
www.nwstp.com/jsm/bjwsc512.bin
tried pulling it on my pocket programmer as both a 256 and 512.
Member
Joined: Jul 2003
Posts: 458
Likes: 2
From: Dallas
Neither one of those .bin files are good. Try reading it again and make sure that the PPII is set for 27C512 and a binary file and no offsets. My guess is that the .bin is for an S-10 V-6 4.3 TBI, but I could be wrong. If you can get a good read, I can tell you what it is. HTH
Last edited by HaulnA$$; Jan 22, 2005 at 12:52 PM.
Thread Starter
Member
Joined: Nov 2004
Posts: 126
Likes: 0
Thread
Thread Starter
Forum
Replies
Last Post
