Where Do You Buy Chip Burning Equiptment
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Where Do You Buy Chip Burning Equiptment
i want to start burning my own chips. where do i purchase the burner, chips, adapter or what ever else i need to burn my own chips. what equiptment do i need also. thanks guys
Junior Member
Joined: Feb 2005
Posts: 91
Likes: 0
From: South Carolina
Car: 91 GTA - 94 TPI Suburban
Moates.net
Read this
I have listed all the equipment I bought to read and burn my flash chips. This is equipment and software will also work with other ECM's and masks. The ALDL cable and USB adapter are only needed for datalogging, but I would consider that essential for the process. I mean, what good is it to make a change if you can not see the results on screen.
Moates comes highly recommended. Ed
I have listed all the equipment I bought to read and burn my flash chips. This is equipment and software will also work with other ECM's and masks. The ALDL cable and USB adapter are only needed for datalogging, but I would consider that essential for the process. I mean, what good is it to make a change if you can not see the results on screen.
Moates comes highly recommended. Ed
Thread Starter
Supreme Member
Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
ed thanks for all of the info that you gave 
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 2
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Thread
Thread Starter
Forum
Replies
Last Post