Brake-In PROM
Thread Starter
Member
Joined: Nov 2003
Posts: 299
Likes: 0
From: The Netherlands
Car: Cobra Kit Car
Engine: 350 HSR
Transmission: TKO 600
Axle/Gears: 3.31
Brake-In PROM
Hi,
I am thinking of prepare a PROM with some “Brake-IN” settings for my new 350 engine with a $6-165 ECM
Have some one of you do that before?
Let’s say we put in the PROM the next values:
Minimum RPM = 2000.
Maximum RPM = 3000.
Rev Limit- Stop Fuel= 3100
Rev Limit- Re-Start Fuel= 3050
Spark advance Table. (need to be defined advices are welcome)
Base time = 6°
Maximum Spark Advance = 30°
FAN ON @ 160°F
MPH for Fan 1 Turn On= 0
Minimum MPH for ESC Enable= 0
Ect.
Do I need to do something related to the:
Power Enrichment vs. Temp?
Power Enrichment vs. RPM?
All advices are welcome!!!!!!!!!!!!
Best regards,
Cobra289
I am thinking of prepare a PROM with some “Brake-IN” settings for my new 350 engine with a $6-165 ECM
Have some one of you do that before?
Let’s say we put in the PROM the next values:
Minimum RPM = 2000.
Maximum RPM = 3000.
Rev Limit- Stop Fuel= 3100
Rev Limit- Re-Start Fuel= 3050
Spark advance Table. (need to be defined advices are welcome)
Base time = 6°
Maximum Spark Advance = 30°
FAN ON @ 160°F
MPH for Fan 1 Turn On= 0
Minimum MPH for ESC Enable= 0
Ect.
Do I need to do something related to the:
Power Enrichment vs. Temp?
Power Enrichment vs. RPM?
All advices are welcome!!!!!!!!!!!!
Best regards,
Cobra289
Thread
Thread Starter
Forum
Replies
Last Post
