Ignition problem
Thread Starter
Supreme Member
iTrader: (2)
Joined: Nov 2000
Posts: 1,188
Likes: 2
From: Ft Worth, TX USA
Car: 2016 Ram 1500
Engine: 3.0L Diesel
Transmission: 8sp
Ignition problem
I have been having a specific problem with my ignition and now I think its related to the PROM programming.
I have been tuning my car for about a year and the ignition cuts out sometimes when I hit the gas. Any amount of TPS voltage over .55 causes the engine to run at about 500 rpm very roughly until I let off of the gas.
Then I noticed the other day looking at the log that this stopped when the computer went closed loop. The problem only seems to exist in open loop.
Any Ideas as to why this would be?
I have been tuning my car for about a year and the ignition cuts out sometimes when I hit the gas. Any amount of TPS voltage over .55 causes the engine to run at about 500 rpm very roughly until I let off of the gas.
Then I noticed the other day looking at the log that this stopped when the computer went closed loop. The problem only seems to exist in open loop.
Any Ideas as to why this would be?
Thread
Thread Starter
Forum
Replies
Last Post