Jan 10, 2006 | 08:31 PM
  #1  
needed for stock ACXC1122 bin

5L/tpi/w/ maf/5spd/3:45 Camaro ?

Moderator's Please dont take this post AS Begging

we just have not found it anywhere.
Reply 0
Jan 10, 2006 | 08:55 PM
  #2  
I don't find that as a BCC (not all encompassing, just not in what I have). What is it for?

As for the bin begging, no worries, requesting a stock bin isn't begging. Begging is when someone requests a 'tune' or for a modified bin.

RBob.
Reply 0
Jan 11, 2006 | 05:12 PM
  #3  
no one...
Reply 0
Jan 11, 2006 | 05:38 PM
  #4  
Are you sure it is not AXXC? 91 LB9 MAN etc

I can't find a ACXC. I think you might have a typo there.
Reply 0
Jan 11, 2006 | 10:46 PM
  #5  
Quote:
Originally posted by junkcltr
Are you sure it is not AXXC? 91 LB9 MAN etc

I can't find a ACXC. I think you might have a typo there.
MyBad, Real Baaad...Yup Typo or thicker glasses NEEDED

ACXZ1122 Thank you for the heads up
Reply 0
Jan 12, 2006 | 11:21 AM
  #6  
Looking in my Snap-on prom index, I found your ACXZ 1122, it was preceeded by ABWA 8592, which was preceeded by AANT 4477. So if you have an ABWA or AANT, the base calibrations should be the same, all supercessions were listed as "running change". Hope this can help.
Reply 0
Jun 14, 2010 | 11:59 PM
  #7  
Re: ftp site..
Hey there buddy i was just reading your comment that you have a ACXZ 1122 i was asking you still have that up or that place where you found it man i need that pretty bad so if you can write back or send me a email justinbrar1@hotmail.com thanks bye.
Reply 0
Subscribe