Just wondering if the cable will work with tunerpro because I cant datalog with my version of diacom. I have also managed to lose the little round plug that goes in the cable. Im not exactly sure what it did. I would just try it but im rebuilding my motor right now and I would like to have something to datalog on hand when im ready to fire it up. oh yea is a 165 ecm

 

No, the cable is Diacom specific, and will only work with the Diacom software. Why cant you data capture with the Diacom?

 

Because i have a cheap old version and it doesnt have that feature. I Guess ill just buy a cable on ebay. Thanx for the reply.

 

Oh yea, I forgot that there are Diacom and the Diacom plus version. I guess I'm just spoiled. Did not use my head there.

Good luck! I searched Ebay for a long time before I broke down and bought mine from Rinda Tech.

 

I was thinking something like this and tunerpro

http://cgi.ebay.com/ebaymotors/ALDL-...QQcmdZViewItem

Will this work ok?

How do you like that edge by the way. I just bought one with a 3000 stall and i cant wait to get the motor back in and try it out

 

Not familiar with that item. Talk to the seller.

I only ran it a few times on opening day. Picked up two tenths, 5 mph in the 1/8th. I think I have a bit too much converter. Should of went with a 3200. I gave Andre, at Edge all my info, and I went with it because he suggested it. We will see, next time out at the track. I'm gonna play with the TCC unlock prevention threshold, and see what happens. BTW, I had to soft launch it that day.