bin location start
Thread Starter
Joined: Dec 1999
Posts: 3,544
Likes: 19
From: WI,USA
Car: 89 FORMULA 350, 91 Z28 Convertible
Engine: ls1, LB9
Transmission: t56, Auto
Axle/Gears: S60/ 3.73
bin location start
quick question.....using the 27c256 chip..... and using the file for a 27c128 chip (6e) 16k right? I just start it at location $4000 ? or do I need to start the file later in the chip?
bassically my 27c128 chips are all done now and I have a bunch of 27c256 chips laying here.
and the basic deal is programming a 165 ecm with the 6e bin using the 27c256 chip
bassically my 27c128 chips are all done now and I have a bunch of 27c256 chips laying here.
and the basic deal is programming a 165 ecm with the 6e bin using the 27c256 chip
Last edited by 88 350 tpi formula; Jun 7, 2006 at 09:28 AM.
Member
Joined: Feb 2006
Posts: 180
Likes: 0
From: Monroe, NY
Car: 1987 Corvette
Engine: 383 ci
Transmission: ZF 6 Speed
Axle/Gears: 4.10 Dana 44
I haven't burned a chip using an offset yet, but hopefully this helps:
http://www.moates.net/documentation....entation_id=20
http://www.moates.net/documentation....entation_id=20
Thread
Thread Starter
Forum
Replies
Last Post